At least it wasn't the blue screen of death 🙂 but only because it wasn't blue. While I wondered about this, the machine crashed. This is not optimal, and I wondered if it could be causing the problem. I discovered the system report and found that I had the following configuration: However, in short order I had an application crash-never happened before. I installed the two 8GB DIMMS in slots 1 and 3 and the 2 2GB DIMMs in slots 2 and 4.

I couldn't find information identifying the memory slots vs Banks/DIMMs, so I guessed.

It has been running without problems since (a couple of hours).

Installed the 2 4GB DIMMs in the mac mini.

Removed the 2 8GB DIMMs from the mac mini.

I stored the original 2GB sticks in the Crucial packaging. I upgraded the mac mini with two 8GB DIMMs purchased from Crucial. I also have a late 2012 mac mini which came with two 2GB DIMMs. I believe that these are Bank0/DIMM0 and Bank1/DIMM0.

IMac came with 8 GB of Ram, one DIMM installed in slot 1, the other in Slot 3 (using my numbering). This is basic information and I can't find it.) When you have the iMac face down with the stand toward you, number the DIMM slots 1,2,3,4 with 1 nearest the base of the machine (amazingly, I have failed to find an illustration of which physical slots correspond to which Bank/DIMM slots. I have upgraded the memory in my new 27' late 2013 iMac and it has been an interesting experience.

Best ram for imac 27 late 2013